Tag Archives: new knitters

n00b Hat, Part 5: Finishing

You’re so close to finishing your hat, I can smell it.  (Or maybe that’s the spiced apple cider heating up on my stove…mmm, I love fall.) In fact, you are totally done with your knitting, and all that’s left is to do your finishing.  In this case, that means sewing up the seam along the back of the hat, so that it ends up… well… hat-shaped.

Start out by cutting your working yarn, leaving a good 18-inch tail on your project.  Thread this tail onto your tapestry needle.

OLYMPUS DIGITAL CAMERAThen, turn your hat over, so that you can see the purl side facing up.  Carefully use your tapestry needle to thread your tail from the left, through  the 8 remaining stitches.

OLYMPUS DIGITAL CAMERAOnce you have your last stitches safely contained on your tail, you can remove your knitting needle (So long, knitting needle!) and pull the tail snug.  This makes a nice little rosette-dealy at the top of your hat. See?

OLYMPUS DIGITAL CAMERANow, sew the two edges of your knitting together, using your yarn tail.  I like to use a mattress stitch, but feel free to use whatever you are most comfortable with (whip stitch will also work well).  Try to make your seam as neat as possible, but don’t worry too much (since the seam is worked with the same yarn as the rest of the hat, even messy stitching won’t show up too much).

OLYMPUS DIGITAL CAMERAWhen you’ve finished sewing up the hat, it should look like this.  Very hat-like.  (Hattish? Hat-esque?)

OLYMPUS DIGITAL CAMERASee how you still have those two pesky ends?  We have to do something with them (unless you like big hunks of yarn hanging down off your hat, I suppose).  So, turn your hat inside-out.  See the seam allowance that you made by sewing the two sides of your hat together?  Sew your yarn up through that for a couple inches.  (Throw in a knot or a securing stitch, if you want.) Then, cut your tails, leaving a 1-2 inches dangling inside the hat.

OLYMPUS DIGITAL CAMERAAnd that’s it!  You’re done!  You have a great knitted cap!  Congratulations!

If you have questions, please let me know, and I’ll be happy to help!

n00b Hat, Part 4: Decreasing

How’s your hat going?  Mine’s looking pretty good, and I bet yours it too.

OLYMPUS DIGITAL CAMERABut, you’ve probably noticed, that this hat is a big flatty-flat piece of knitting.  And, I don’t know about you, but my head is not flat.  It is big and round, like a melon.

So, we probably need to make our hats a little more head-shaped.  We’ll do that by adding some “shaping” to our knitting.  Shaping is a generic term for using special stitches to give your knitting a 3D shape.  I’ll show you how to do a simple knit two together decrease (which is usually shortened to ‘k2tog’).

We’re going to do 8 k2togs across each knit row of the hat for the rest of the project.  Make sure you are working on a knit row, and start following along.

Knit 8 stitches regularly.  Then, get ready for a k2tog.

OLYMPUS DIGITAL CAMERAk2togs are super easy to do.  It’s exactly like doing a knit, but instead of poking your right needle through a single stitch, you poke it through two stitches.  Like this:

OLYMPUS DIGITAL CAMERAThen, wrap your yarn around the tip of your needle.

OLYMPUS DIGITAL CAMERAAnd pull your new stitch through both old stitches.

OLYMPUS DIGITAL CAMERAThen drop the old stitches off your left-hand needle.  See how you’ve decreased the number of stitches by one?  (2 old stitches = 1 new stitch)

OLYMPUS DIGITAL CAMERAKeep working in the established pattern: Knit 8 stitches, then k2tog. Knit 8, k2tog, knit 8, k2tog, over and over.  You should end the row with a k2tog.

The next row is a purl row, so purl all stitches (don’t do any decreases).

The next row is a knit row, so you’ll do decreases again.  This time, knit 7 stitches, k2tog, knit 7 stitches, k2tog, etc.

Then purl a row.

Then work a knit/decrease row.  Knit 6, k2tog, knit 6, k2tog, etc.

Then purl a row.

Then do another knit/decrease row.  Knit 5, k2tog, knit 5, k2tog, etc.

Then purl a row.

See how the pattern goes?  All purl rows are worked like normal.  All knit rows include decreases.  Each time you do a decrease row, you knit 1 fewer stitch between each decrease.  (If you find yourself getting confused, make notes on a post-it to help you keep track of where you are.) If you keep working in this pattern, your decreases will end up lining up nicely.  Kind of pretty, right?

OLYMPUS DIGITAL CAMERAKeep going until you only have 8 stitches left on your needle, finishing with a knit row.   See how it actually kind of looks like a hat now?  Exciting!

OLYMPUS DIGITAL CAMERANext week, Finishing your hat!

n00b Hat, Part 2: Casting on and the knit stitch

Are you as excited as I am about this project? Doubtful.  Possible, but doubtful.  I am very excited.  One of my favorite things to do is teaching people how to knit, so this is totally up my alley.

So, let’s jump right in and start casting on.  Knitted fabric is made of a whole series of loops that all interlock in a very specific way.  These loops give the finished fabric stretch, which is what makes knitting so awesome for making sweaters, socks, and hats.  The first row of loops is created by casting on.  We’ll be doing a long-tail cast on, since it’s the most versatile way to do a cast on.  (I use it on 90% of all my projects).

Start by measuring out a long tail (duh) that is about 4 times as long as your finished project.  (Since this is a hat, you can wrap your yarn around your head 4 times to estimate your length.)  Then, make a slip knot at the point that you measured.  In this case, you’ll have your ball of yarn on one side of the slip knot, and about 6 or 7 feet of yarn on the other end.  Slip the slip knot on your needle and tighten the loop so that it won’t fall off the needle.

OLYMPUS DIGITAL CAMERANow, with your non-dominant hand, grab both the ball yarn and the tail yarn with your pinky and ring finger.  Then, slip your thumb and index finger between the two ends of yarn.  Make sure that the tail yarn is the one wrapped around your thumb.

OLYMPUS DIGITAL CAMERAUse the point of the needle to slide from the bottom of your thumb to the top, picking up a loop of yarn.  Don’t let the yarn slip off your thumb.  Your pinky and ring fingers should keep tension on your yarn, which can help this.

OLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAThen, move the point of the needle over to the tip of your index finger.

OLYMPUS DIGITAL CAMERASlide the point of the needle down your index finger, then down your thumb, too.  This will hook the loop of yarn from your index finger, and pull it through the thumb loop.

OLYMPUS DIGITAL CAMERANow, here’s the scary part.  Drop the yarn from your left hand.  I promise you won’t loose your work.OLYMPUS DIGITAL CAMERAPull on the yarn tails to snug up your new stitch.  Now you have two stitches!  Huzzah!

OLYMPUS DIGITAL CAMERAAnd now, you keep going.  Grab the yarn again in your non-dominant hand, with your thumb and index finger between the tail and the ball yarn.  Use the tip of the needle to slide up your thumb, over to your index finger, and back down your thumb, pulling the index finger loop through the thumb loop.

OLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAThen, drop the yarn, and tighten up your third stitch.

OLYMPUS DIGITAL CAMERAKeep on going, repeating these steps until you end up with 80 stitches on your needle.  (I know it seems like a lot, but practice makes perfect.  You’ll be burning through them before you know it.)  When you get all 80 stitches, tie up any remaining tail yarn into a little bundle to keep it out of your way.   You won’t do anything else with the tail until you’re done with all the knitting on this project.

OLYMPUS DIGITAL CAMERADid you get your 80 stitches all cast on?  Awesome!  Now it’s time to really start knitting.  Whenever you knit, you’re going to have the “old” stitches on your left-hand needle, and you will make the new stitches on your right-hand needle. So, that’s how we’re going to start.  Hold your needle with the stitches in your left hand, and your empty needle in your right hand.  Keep your ball of yarn on your right side.

OLYMPUS DIGITAL CAMERAAre you ready to start your first knit stitch?  Yes!

Insert the point of your right needle into the front of the first stitch, with your yarn held behind your knitting.  (The “front” of your knitting is the side that faces you as you work on it.  The “back” of your knitting is the side that faces away from you.) It should look like this:  OLYMPUS DIGITAL CAMERAThen, wrap the yarn around the tip of the right-hand needle.

OLYMPUS DIGITAL CAMERAPull that new loop carefully through the old stitch.  This is tricky at first, so keep trying.  If you keep a little tension on your yarn, it makes it easier.  I like to wrap the yarn around my index finger to help keep tension, but if you don’t like that, try holding the yarn between your index an thumb, or wrapping it around your whole hand.  Every knitter holds their yarn a little differently. Find what feels good to you.

OLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAYou’ve made your new stitch (the loop you just made on your right-hand needle).  Now it’s time to get rid of your old stitch.  To do this, simply slip it off the end of the left-hand needle. Easy.

OLYMPUS DIGITAL CAMERAYou’ve finished your first stitch!  Congrats!  Now you just need to make approximately 1 billion more.  (Not really.  Although sometimes I wonder about how many stitches there are in a hat, or a sweater or something.  I’ve never actually sat down to do the math.  That would be crazy.)

Knit your second stitch:  Insert your right-hand needle into the front of the next stitch, wrap your yarn around the tip of the needle, pull the new stitch through, and then drop the old stitch off the end of the left-hand needle.

OLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERAOLYMPUS DIGITAL CAMERATwo stitches done!  Keep going like this until you reach the end of the row.

OLYMPUS DIGITAL CAMERAWhen you get to the end, swap your needles, so that your empty needle is in your right hand, and your needle with stitches on it is in your left hand.  Then, keep knitting away!

OLYMPUS DIGITAL CAMERAKeep knitting, switching your needles around at the end of each row, and soon enough you’ll see some awesome squishy fabric start growing off your needles.  (If your stitches aren’t as even as mine, that’s OK.  It adds character!  And, if you think it’s too bad to actually wear, you could frame the finished hat as a piece of modern art or something.)

OLYMPUS DIGITAL CAMERAThis pattern is called “Garter Stitch.”  It’s made when you knit every single row.  This is the brim of the hat we’re working on.  I worked my garter stitch for about 2 inches.  You can make your garter stitch brim wider or narrower by knitting more or fewer rows.

Next week, we’ll make the body of the hat, and I’ll show you how to work the purl stitch.  Happy knitting!